Neueste Beiträge
#1
Installation & Update / Aw: Sehr langsame Seite nach d...
Letzter Beitrag von Olaf - 21 April 2024, 11:00:03das freut mich
#2
Installation & Update / Aw: Sehr langsame Seite nach d...
Letzter Beitrag von debs - 20 April 2024, 08:13:58Übersetzt von Google
Guten Morgen,
Aus einem unbekannten Grund funktioniert PMx ordnungsgemäß mit dem OVH-Host.
Ich habe eine neue ,,Neuinstallation" durchgeführt und die Installation verlief normal.
Alles scheint gut zu funktionieren.
Vielen Dank an alle für Ihre Hilfe.
Guten Morgen,
Aus einem unbekannten Grund funktioniert PMx ordnungsgemäß mit dem OVH-Host.
Ich habe eine neue ,,Neuinstallation" durchgeführt und die Installation verlief normal.
Alles scheint gut zu funktionieren.
Vielen Dank an alle für Ihre Hilfe.
#3
Installation & Update / Aw: Installation von PMX 2.8.7...
Letzter Beitrag von debs - 20 April 2024, 08:05:04Übersetzt von Google
Guten Morgen,
Ich bestätige, dass das Problem nach der Aktualisierung der folgenden Datei behoben ist:
module/Downloads/core/install.tabledef.php
(Siehe die Codezeilen oben im Diskussionsthread)
Danke Olaf
Guten Morgen,
Ich bestätige, dass das Problem nach der Aktualisierung der folgenden Datei behoben ist:
module/Downloads/core/install.tabledef.php
(Siehe die Codezeilen oben im Diskussionsthread)
Danke Olaf
#4
Installation & Update / Aw: Sehr langsame Seite nach d...
Letzter Beitrag von debs - 13 April 2024, 17:59:50Französisch/Deutsche Übersetzung von Google
Hallo
Ich habe gerade auf PHP 8.3 aktualisiert, aber keine Änderung.
PMX Version 2.7.2 funktioniert gut. Es ist von der PMX 2.8.X-Version, dass es langsamer wird.
"Olaf muss ein Drehbuch überprüfen"
Danke für Ihre Hilfe.
Ich wünsche Ihnen einen schönen Abend.
Hallo
Ich habe gerade auf PHP 8.3 aktualisiert, aber keine Änderung.
PMX Version 2.7.2 funktioniert gut. Es ist von der PMX 2.8.X-Version, dass es langsamer wird.
"Olaf muss ein Drehbuch überprüfen"
Danke für Ihre Hilfe.
Ich wünsche Ihnen einen schönen Abend.
#5
Installation & Update / Aw: Sehr langsame Seite nach d...
Letzter Beitrag von titoun - 12 April 2024, 13:19:27Bonjour les amis
Peut-être quand modifiant la Version PHP globale d'OVH pour la 8.3 (dernière version stable)
PragmaMx 2.8.7 sera beaucoup plus rapide a l'affichage après l'installation !
A bientôt
Peut-être quand modifiant la Version PHP globale d'OVH pour la 8.3 (dernière version stable)
PragmaMx 2.8.7 sera beaucoup plus rapide a l'affichage après l'installation !
A bientôt
#6
Installation & Update / Aw: Installation von PMX 2.8.7...
Letzter Beitrag von Olaf - 07 April 2024, 17:36:44Du kannst mir die Daten per PM (Private Notes) senden. Klicke unter meinem Avatar auf das Symbol "Sprechblase"
#7
Installation & Update / Aw: Sehr langsame Seite nach d...
Letzter Beitrag von debs - 07 April 2024, 16:01:55Ich habe keine Subdomain.
Also habe ich eine Neuinstallation mit PMX 2.8.7 durchgeführt.
Ich bin bereit, Ihnen Super-Admin-Rechte zu geben, aber wie kann ich sie Ihnen geben, ohne dass es offensichtlich ist?
Vielen Dank für Ihre Antworten.
Also habe ich eine Neuinstallation mit PMX 2.8.7 durchgeführt.
Ich bin bereit, Ihnen Super-Admin-Rechte zu geben, aber wie kann ich sie Ihnen geben, ohne dass es offensichtlich ist?
Vielen Dank für Ihre Antworten.
#8
Installation & Update / Aw: Installation von PMX 2.8.7...
Letzter Beitrag von debs - 07 April 2024, 15:47:30Der Code wurde korrigiert.
Die Installation verlief normal.
Es gibt immer die Verlangsamung von Seiten, die langsam sind.
Diese Verlangsamung beginnt, sobald die PMX-Installation abgeschlossen ist, wenn das Administratorkonto erstellt wird.
Die Installation verlief normal.
Es gibt immer die Verlangsamung von Seiten, die langsam sind.
Diese Verlangsamung beginnt, sobald die PMX-Installation abgeschlossen ist, wenn das Administratorkonto erstellt wird.
#9
Installation & Update / Aw: Sehr langsame Seite nach d...
Letzter Beitrag von Olaf - 06 April 2024, 18:19:50kannst du auf einer Subdomain von dir eine neue leere Seite mit der Version 2.8.7 erstellen? Mit neuer Datenbank. Und mir dann dort mal einen Super-Admin-Zugang einrichten. Dann kann ich mir das mal ansehen.
------------------- gooogle translate -------------
pouvez-vous créer une nouvelle page vierge avec la version 2.8.7 sur un de vos sous-domaines ? Avec une nouvelle base de données. Et puis configurez-y l'accès super administrateur. Ensuite, je pourrai y jeter un œil.
------------------- gooogle translate -------------
pouvez-vous créer une nouvelle page vierge avec la version 2.8.7 sur un de vos sous-domaines ? Avec une nouvelle base de données. Et puis configurez-y l'accès super administrateur. Ensuite, je pourrai y jeter un œil.
#10
Installation & Update / Aw: Installation von PMX 2.8.7...
Letzter Beitrag von Olaf - 06 April 2024, 18:14:53ändere bitte in modules/Downloads/core/install.tabledef.php ab Zeile 24:
dann sollte es wieder gehen
Code Auswählen
CREATE TABLE `{$prefix}_downloads_downloads` (
`lid` int(11) NOT NULL auto_increment,
`cid` int(11) NOT NULL DEFAULT '0',
`sid` int(11) NOT NULL DEFAULT '0',
`title` varchar(100) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`url` varchar(255) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`description` text COLLATE utf8_unicode_ci,
`date` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,
`name` varchar(100) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`email` varchar(100) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`hits` int(11) NOT NULL DEFAULT '0',
`submitter` varchar(60) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`downloadratingsummary` double(6,4) NOT NULL DEFAULT '0.0000',
`totalvotes` int(11) NOT NULL DEFAULT '0',
`totalcomments` int(11) NOT NULL DEFAULT '0',
`filesize` int(11) NOT NULL DEFAULT '0',
`version` varchar(20) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`homepage` varchar(200) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`keywords` text COLLATE utf8_unicode_ci
) ENGINE=MyISAM DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;";
inCode Auswählen
CREATE TABLE `{$prefix}_downloads_downloads` (
`lid` int(11) NOT NULL auto_increment,
`cid` int(11) NOT NULL DEFAULT '0',
`sid` int(11) NOT NULL DEFAULT '0',
`title` varchar(100) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`url` varchar(255) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`description` text COLLATE utf8_unicode_ci,
`date` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP,
`name` varchar(100) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`email` varchar(100) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`hits` int(11) NOT NULL DEFAULT '0',
`submitter` varchar(60) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`downloadratingsummary` double(6,4) NOT NULL DEFAULT '0.0000',
`totalvotes` int(11) NOT NULL DEFAULT '0',
`totalcomments` int(11) NOT NULL DEFAULT '0',
`filesize` int(11) NOT NULL DEFAULT '0',
`version` varchar(20) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`homepage` varchar(200) COLLATE utf8_unicode_ci NOT NULL DEFAULT '',
`keywords` text COLLATE utf8_unicode_ci,
PRIMARY KEY (`lid`)
) ENGINE=MyISAM DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;";
dann sollte es wieder gehen